Wall Vents
Features
-
Designed as a practical low cost ventilating system for Metal-Clad buildings
-
Insulated: top-Hinged & Pivoted
-
Non-Insulated: Top-Hinged & Pivoted
-
Designed to limit air-infiltration
-
Manufactured from low maintenance components using high-strength materials for rugged performance
-
Designed for manual and multiple cable operation
-
Plyco pivoted wall-vents are adaptable to many agricultural and industrial applications
Resources
Specifications
Insulated Wall Vents
INSULATED TOP-HINGE (I)
-
Panel
1 1/4" Insulated Polyurethane solid foam core with white embossed skins on interior and exterior. .055 extended aluminum panel surround with TPR weatherstrip. "R" factor -9.5
-
HingesThree recessed aluminum hinges bolted to frame and insulated panel through reinforcing blocks
-
AdjusterSpecial design with friction adjusters for multiple settings. All aluminum
-
HandleSix inch, aluminum
-
Frame.070 extruded aluminum, mill finish, mitered and welded corners - self-flashing on profiled sidings up to 1 1/8"
-
Optional Hardware
We offer the option of special hardware for installation where the wall-vents will be opened from the outside only.
This hardware is designed for low profile buildings where it is difficult to open the wall-vent from the interior. Hardware is designed for 4 positive opening positions. When this option is desired, add "ED" to the stock number.Manual operating hardware same as pivoted, except K/D.
INSULATED-PIVOTED (PI)
-
Frame.070 mill finish extruded aluminum, corners are mitered and welded. Self-flashing on profiled sidings up to 1 1/8"
-
Panel1 1/4" insulated with identical characteristics of top-hinge insulated panel. Blocking located in lower center of panel for cable or pull attachments.
-
Pivot ArmCord rolled steel welded directly to exterior frame. Installed off-center to assist closure
-
HardwareCustom designed cam lever for manual operation with five position points, the panel can be located at various settings to control air-flow. A stainless steel closure rod locks panel firmly in position.
-
Option"ED" Hardware for exterior operation
Non-Insulated Wall Vents
NON-INSULATED TOP-HINGE (S)
-
Frame.055 Extruded aluminum, mill finish miter and welded corners - self-flashing on profiled sidings up to 1 1/8"
-
Panel1" x 1 1/4" thick extruded aluminum. Mill finish, with glazed translucent fiberglass
-
Adjuster & PullIdentical to adjusters described for use with top-hinged insulated series
-
Frame.070 extruded aluminum jointless frame, mill finish
-
PanelIdentical to #S-7220
-
HingesIdentical to #S-7220
-
ClosuresTwo Wright #45 cam operated handles custom plated and located 8 inches from each end of the panel to assure positive closing
-
HardwareAluminum slide bar, with 4 opening positions. I-bolt on top panel locks bar in closed position - #ED-WALL VENTS can be operated only from the exterior
NON-INSULATED - PIVOTED - (PS) - TRANSLUCENT PANEL
-
FrameIdentical to PI Series
-
Panel1 1/4" thick extruded aluminum, mill finish, glazed with translucent fiberglass
-
Pivot ArmIdentical to PI Series
-
HardwareIdentical to PI Series
-
Optional Hardware"ED" Hardware for exterior operation available when option is desired add "ED" prefix to the stock number
-
Storm PanelsFor insulated buildings, optional translucent fiberglass storm panels can be attached to operating panel and are self-storing